Floor Door - Model DCT
Split Leaf, Extruded Aluminum for Carpet or Composition Tile

SPECIFICATIONS:

Furnish where indicated on plans, Interior or Exterior Type DCT Type, SCT Door, Model No. _________, factory fabricated and completely assembled. Door set up for floor tile or carpet with a metal surround 1/8" or 3/16" place on frame and leaf. Door leafs of 1/4" flat aluminum floor plate with reinforcing bars welded to leafs, to support from 150# per sq. ft. Frame shall be 1/4" extruded aluminum shape, fully welded, with 1-1/8" anchor strap bolted to frame. Leaf hardware shall be equipped with heavy stamped 1/4" aluminum hinge bolted to frame and leaf, torsion bars for easy operation, have a one-point latch, inside and outside handles, automatic hold-open arm with vinyl handle grip. Hardware shall be cadmium plated, and factory finish shall be mill finish or a prime coat applied to aluminum frame and leafs.

Stainless steel hardware available in high corrosive areas for all Aluminum Floor, Pit, and Sidewalk Doors so specified.

AVAILABLE SIZES:

MODEL
CLEAR OPENING
WEIGHT
DCT
4'0" x 4'0"
160 lbs.
DCT
4'0" x 6'0"
180 lbs.
DCT
5'0" x 5'0"
240 lbs.
DCT
5'0" x 7'0"
330 lbs.

 

 

 

 

**Use call-out letter for type of metal:
A = ALUMINUM
Contact us for custom sizes

Technical Drawing

 


Dur-Red Products

4900 Cecelia Street, Cudahy, CA  90201
 
Phone (323) 771-9000  FAX (323) 771-9009
email info@dur-red.com

products | what's new | about us